injection grout meaning in Chinese
压力灌浆
Examples
- A injection grouting technique for mine method tunnal between chongwenmen and dongdan of metro line 5 in beijing
北京地铁五号线崇文门至东单区间隧道浅埋暗挖注浆技术 - The consumption of the injection grout include two parts : the consumption which are caused by the deformation of the rock mass and the slurry which fill the void space of the joint in the rock mass , this is q = q1 + k ? qq2 . in this paper , fem is used to compute the deformation of the rock mass
灌浆的注入量主要来源于两部分：由岩体变形引起的注浆量和由浆液充填节理裂隙的空隙的注浆量，即： q = q _ 1 + k ? q _ 2 。 - Lastly , two conditions were simulated and computed by using the fem program : two pieces of joint and one piece of joint which have different depth , different grouting stress , different pressure on the ground surface , etc . and then some results were obtained about the relation of the grouting press , the lifting of the ground surface and the cosumptionof the injection grout
最后，依据所编的程序对不同埋深、不同灌浆压力、不同压重等的单条节理裂隙的灌浆情况和两条节理裂隙的灌浆情况进行了模拟计算，得出了一些结论：灌浆压力、地表抬动和注浆量之间的关系。 - And the consumption which are caused by the deformation of the rock mass and the consumption which fill all the void space of the joint can be got . then the block coefficient k of the this geologic condition can be got by the actual consumption of the injection grout in the practical grouting
本论文中主要通过有限元法来计算岩体的变形，并进而求得由岩体变形引起的那部分注浆量和完全充填节理裂隙的注浆量，再根据实际工程的实际注浆量来计算试验所代表的地层的充填系数k 。